| |
|
Technical DetailsMaterial: Shockproof ,flexible,recycling / ABS POLYLAC PA-709 / material with UVe.
Lighting: Construction sheet on the base of ABS. Sofita bulbs, / sport circuit excluded.
Magnet: Magnetit hard ferrite / everlasting /. | |
|
|
|
|
 |
 |
 |
| Wednesday, June 05, 2002 |
POLYLAC PA-709
|
|
Chi Mei Industrial Co., Ltd. - Acrylonitrile Butadiene
Styrene
|
 |
|
|
|
|
|
|
|
|
|
|
| Properties 1 |
| Physical |
Nominal Values |
(English) |
Test Method |
 |
|
Density -Specific Gravity |
|
1.03 |
|
sp gr 23/23C |
|
ASTM D792 |
 |
|
Melt Flow Rate (200C/5.0 kg - G) |
|
0.500 |
|
g/10 min |
|
ASTM D1238 |
|
|
Mold Shrink, Linear-Flow (0.125 in) |
|
0.0030 to 0.0070 |
|
in/in |
|
ASTM D955 |
|
|
| Mechanical |
Nominal Values |
(English) |
Test Method |
|
|
Tensile Modulus (73 F) |
|
365000 |
|
psi |
|
ASTM D638 |
|
|
Tensile Strength |
|
5670 |
|
psi |
|
ASTM D638 |
|
|
Tensile Strength @ Yield (73 F) |
|
5700 |
|
psi |
|
ASTM D638 |
|
|
Tensile Elongation @ Brk (73 F) |
|
40 |
|
% |
|
ASTM D638 |
|
|
Flexural Modulus (73 F) |
|
320000 |
|
psi |
|
ASTM D790 |
|
|
Flexural Strength |
|
9070 |
|
psi |
|
ASTM D790 |
|
|
Flexural Strength @ Yield (73 F) |
|
9100 |
|
psi |
|
ASTM D790 |
|
|
| Impact |
Nominal Values |
(English) |
Test Method |
|
|
Notched Izod Impact |
ASTM D256 |
|
|
(73 F, 0.125 in) |
|
8.40 |
|
ft-lb/in |
|
|
|
|
(73 F, 0.250 in) |
|
7.40 |
|
ft-lb/in |
|
|
|
|
| Hardness |
Nominal Values |
(English) |
Test Method |
|
|
Rockwell Hardness (R-Scale) |
|
102 |
|
|
|
ASTM D785 |
|
|
| Thermal |
Nominal Values |
(English) |
Test Method |
|
|
DTUL @264psi - Annealed |
|
208 |
|
F |
|
ASTM D648 |
|
|
DTUL @264psi - Unannealed |
|
190 |
|
F |
|
ASTM D648 |
|
|
DTUL @66psi - Unannealed |
|
208 |
|
F |
|
ASTM D648 |
|
|
Vicat Softening Point |
|
221 |
|
F |
|
ASTM D1525 |
|
|
CLTE, Flow |
|
6.2E-005 |
|
in/in/F |
|
ASTM D696 |
|
|
| Electrical |
Nominal Values |
(English) |
Test Method |
|
|
Volume Resistivity |
|
1.0E+015 |
|
ohm-cm |
|
ASTM D257 |
|
|
| Ignition Characteristics |
Nominal Values |
(English) |
Test Method |
|
|
UL File Number |
|
E56070 |
|
|
|
|
|
|
Flame Rating - UL |
UL 94 |
|
|
(0.0625 in) |
|
HB |
|
|
|
|
|
|
(0.118 in) |
|
HB |
|
|
|
|
|
|
| UL 746 |
Nominal Values |
(English) |
Test Method |
|
|
Rel Temp Indx Mech w/oImp |
UL 746 |
|
|
(0.125 in) |
|
140 |
|
F |
|
|
|
|
(0.0618 in) |
|
140 |
|
F |
|
|
|
|
Rel Temp Indx Mech w/Imp |
UL 746 |
|
|
(0.0618 in) |
|
140 |
|
F |
|
|
|
|
(0.125 in) |
|
140 |
|
F |
|
|
|
|
Rel Temp Indx Elect |
UL 746 |
|
|
(0.0618 in) |
|
140 |
|
F |
|
|
|
|
(0.125 in) |
|
140 |
|
F |
|
|
|
|
| Additional Properties |
|
|
Melt Flow Rate, ASTM D-1238, Condition G: 0.6 g/10 min
Volume Resistivity, ASTM D257: > 1E 15 ohm-cm
Impact Flexural Test, ISO 179/2C, Notched: 21 kJ/m
Impact Flexural Test, ISO 179/2D, Unnotched: No Break
Vicat Softening Temp, DIN 53460, 50C/hr ; 1 kg: 103C
Vicat Softening Temp, DIN 53460, 50C/hr ; 5 kg: 94C
Vicat Softening Temp, DIN 53460, 120C/hr ; 1 kg: 104C
Vicat Softening Temp, DIN 53460, 120C/hr ; 5 kg: 95C
DTUL @ 1.80 MPa, DIN 53461, Unannealed: 79C
DTUL @ 1.80 MPa, DIN 53461, Annealed: 98C
Impact Flexural Test, DIN 53453, Notched: 21 kJ/m
Impact Flexural Test, DIN 53453, Unnotched: No Break
Tensile Strength @ Yield, DIN 53455, 50 mm/min: 40 MPa
Tensile Strength @ Break, DIN 53455, 50 mm/min: 32 MPa
Tensile Elongation, DIN 53455, 50 mm/min: 55%
Flexural Strength, DIN 53452, 2 mm/min: 58 MPa
Flexural Modulus, DIN 53452, 2 mm/min: 1.8 Gpa
Mass Density, DIN 53479-A, 23C: 1.03 g/cm
UL Values (Canada):
UL 94, 1.57 mm: HB
UL 94, 3.17 mm: HB
RTI Elec, 1.57 mm: 60C
RTI Elec, 3.17 mm: 60C
RTI Elec w/I, 1.57 mm: 60C
RTI Elec w/I, 3.17 mm: 60C
RTI Elec wo/I, 1.57 mm: 60C
RTI Elec wo/I, 3.17 mm: 60C |
|
|
| Processing Information |
| Injection Molding Parameters |
Nominal Values |
(English) |
Test Method |
|
|
Drying Temperature |
|
175 to 185 |
|
F |
|
|
|
|
Drying Time |
|
3.0 |
|
hr |
|
|
|
|
Suggested Max Moisture |
|
0.10 |
|
% |
|
|
|
|
Suggested Max Regrind |
|
20 |
|
% |
|
|
|
|
Suggested Shot Size |
|
40 to 80 |
|
% |
|
|
|
|
Rear Temperature |
|
355 to 390 |
|
F |
|
|
|
|
Middle Temperature |
|
390 to 430 |
|
F |
|
|
|
|
Front Temperature |
|
420 to 455 |
|
F |
|
|
|
|
Nozzle Temperature |
|
410 to 445 |
|
F |
|
|
|
|
Processing (Melt) Temp |
|
465 |
|
F |
|
|
|
|
Mold Temperature |
|
120 to 140 |
|
F |
|
|
|
|
Injection Pressure |
|
850 to 1000 |
|
psi |
|
|
|
|
Injection Rate |
|
Slow-Moderate |
|
|
|
|
|
|
Holding Pressure |
|
710 to 850 |
|
psi |
|
|
|
|
Back Pressure |
|
70.0 to 140 |
|
psi |
|
|
|
|
Screw Speed |
|
50 to 90 |
|
rpm |
|
|
|
|
|
|
| 1 |
Typical properties; not to be construed as specifications. |
|
Copyright , 2002 IDES "The World's Source
for Materials Information" |
| The information presented on this data
sheet was acquired by IDES from various sources, including the producer
of the material and recognized testing agencies. In some cases, material
updates have been integrated directly into the IDES i-Centric Database
by the material producer utilizing the IDES i-Manage Suite Data Maintenance Tool.
IDES makes substantial efforts to assure the accuracy of this data.
However, IDES assumes no responsibility for the data values and urges
that upon final material selection, data points are validated with
the manufacturer. |
|
|
|
|
|
| |
Technikal data of hard ferritmagnet:
| |
|
|
